Machines

Universal cutter Make Konrad Ströbel Model 500 Year 1970 Knives included the machine comes wi...

Corner `pulling` for board - universal press Knife: 5 mm raidus pulling tools to make round corner for board

Clothcutter Min-max working width: 50 - 1400 mm | Min-max working length: 10 - 1050 mm | Speed: 14-36 cycles...

Foil press Make Kensol Model K36T Year 1970 ? Operation by lever=manual or by pneumatics (2 h...

Perfect binder - 4 clamp binder Speed: up to 1.800 cycli per hour | Book thickness: 3-50 mm | Min book size:...

Size: 400 x 500 mm

Automatic punching machine for Wire-O and more Make JBI - Lhermite Model Lhermite EX610 Year 1...

Wire-O punching machine & closing Make JBI Model PB3000 Year 1995 Workingwidth 330 mm Punchi...

Wire-O closing machine Make JBI Model MAG C54 Year 1991 Workingwidth 540 I5542423 mm Details...

Wire-O closing machine Make JBI Model MAG C54 Year 1991 Workingwidth 540 I5542423 mm Details...

Wire-O punching machine Make JBI Model K50T Year 1991 Workingwidth 500 mm Tools 1 x 3:1 with...

Manual pneumatic press Make IML Model M4 Year 2015 ? Details for all kinds of pressing jobs, ...

Nipping press - manual Make Hunkeler Model FNP500 Year 1980´s Width 500 x 250 I5542423 mm Op...

Spine gluing machine Workingwidth: up to 100 mm | Glue roller: Engraved with glue thickness regulation

Index Cutting Machine Hunkeler Model RE32 Year 1975 Capacity up to 8 mm Tool width up to 320...

Gluing machine for paper Hunkeler Model LAM600 Year 1990 Width 600 mm Available Direct Width: 600 mm

Gluing machine for sheets or board Manufacturer: HUNKELER Model: LAM500 Width: 500 mm | Options: for PVA glue

Collator-Booklet maker - 10 bins with finisher Make Horizon Model VAC-100a + SPF-10 + ST-20 Ye...

Full automatic casemaker Make Horda Model ZFM 700-A Year 2018 ? Sheetsize 90 x 180 - 450 x 72...

bookpress Make Hercules Model 5040 Year 1950's Size 400 x 500 mm Available Direct Size: 400 x 500 mm

Bookpress Make I5542423 Hercules Model 4030 Year 1950's Size 300 x 400 I5542423 mm Available...

Eyeletting machine Make Hang Model Piccolo Year 1980 eyelet I5542423 model 8E I5542423 (5mm) ...

Eyeletting machine Make Hang Model Piccolo Year 1980 eyelet I5542423 model 8E I5542423 (5mm) ...

Eyeletting machine Make Hang Model Piccolo Year 1990 eyelet I5542423 model 8E I5542423 (5mm) ...

Two head paperdriller Make Hang Model 136D Year 1970 Details 2 head paper driller with fixed ...

Two head paperdriller Make Hang Model 136DK Year 1990 Details 2 head paper driller with fixed...

Automatic Ringbinder assembly line Make Hang Model 400+401 Year 2002 Feeder automatic case fe...

Gluingmachine for paper or board Gluing station Prakma 105 top gluing Pressing station Prakma 1...

Casing-in machine Make Prakma Model EH-1 Year +/- 1970 ́s Roller width 370 mm Booksize 100x8...

Gluing machine for paper Prakma Model 55 Year 1970´s Width 550 mm Options with I5542423 stri...

Drill - cornercutter Operation: by foot

Four head paperdriller Make Hang Model 114-4 Year 1997 Details 4 head paper driller with I554...

Four head paperdriller Make Hang Model 106DTK04 Year 1975 Details 4 head paper driller with ...

Riveting machine (1 head) Make Hang Model 84 HS 350 Year 1992 Distance till frame 300 I554242...

Eyeletting machine Hang Model 101-Piccolo III Year 2000 Available direct

Four head paperdriller Make Hang Model 106DTK4 Year 1975 Details 4 head paper driller with a...

with adjustable drilling heads with tabulator Operation: Electric footswitch, 2 speed

Foil stamping - embossing Size of the heating plate: 200 x 300 mm | Size of the shuttle table: 330 x 450mm

Perfect binder - cold glue Gantenbein Model Bufalo BAFC-33 Year 1966 Working width 330 mm Sp...

Perfect binder - cold glue Gantenbein Model Bufalo BAFC-33 Year 1970 Working width 330 mm Sp...

bookpress Make Francis Donnison Model 7050 Year 1900's Size 500 x 700 mm Stack up to 95 cm ...

Gluing machine Make Essor Model 500 Year 1980´s Working size 500 mm Glue cold PVA glue Subs...

Double head paper driller Drill distance: 45 - 150 mm | Space behind drill heads: 100 mm | Operation: Lever ...

Punching machine (heavy duty) De Groot Model Punching Year 1980 Width 600 mm Available Direct Width: 60...

End-sheet gluing machine Minimum size: 100 x 110 mm | Maximum size: 250 x 360 mm | Glue: cold glue appliance...

Gluingmachine for paper or board Make CMC Model Lynx 105 Year 2020 Width 1050 mm Glue Warm a...

Joint forming + pressing Make CMC Model Q-Case - Crator Year 2010 Max size 500 x 420 mm Min ...

Make CMC Model Q-Joint Year 1995 Working width 500 mm Thickness up to I5542423 80 mm Details...

Casing-in machine Make CMC Model Q-Case / Gemat Year 2011 Max size 500 x 420 mm (roll width 4...

Perfect binder Max book size: 450 mm | Min-max thickness: 2-60 mm | Cycles: up to 250

Wire-O punching machine Working width: 330 mm | Tools: 3:1 Wire-O tool with round holes

Riveting machine (2 heads) Head distance: 30 - 450 mm

Digital ECO Solvent roll printer Maximum width: 3200 mm | Meter per minute: up to 50 meter per hour | Print ...

Printingmachine - Two Colour Maximum sheetsize: 340 x 450 mm | Dampening: Alcohol fiilm dampening (no pump)

Printingmachine - Two Colour Maximum sheetsize: 340 x 450 mm | Dampening: Alcohol fiilm dampening with Eco pump

Printingmachine - Two Colour (perfector) Maximum sheetsize: 720 x 1020 mm | Dampening: Alcohol fiilm dampeni...

Board cutter - board shear Cutting length: 110 cm

Board cutter - board shear Cutting length: 140 cm

Electro Foam cutter Max size: 45up to 160 cm | Thickness: up to 30 mm

Guillotine Digital read out + programming + numeric keypad Chromed table 4 spare knives Cuttinglenght: 550 mm

Three knife trimmer Serial: 10040217 | Min untrimmed size: 178 x 127 mm | Min trimmed size: 148 x 100 mm

Three knife trimmer - in-line Serial: 05010048 | Min untrimmed size: 178 x 127 mm | Min trimmed size: 148 x ...

Gluingmachine for paper & board Width: 800 mm | Options: with transport belt

Nipping press - manual Width: 500 x 250 mm | Options: up to 100 mm thickness

Case bending machine - automatic Width: 600 mm

Pressing rollers Width: 600 mm

Case bending machine Width: 610 mm

Gluingmachine for paper Width: 500 mm | Options: for PVA glue, floorstand model

Board cutter - board shear Make Schimanek Model 10-110 Year 1980's Cutting length 110 cm Det...

Sidetableleft + right Hydraulic adjustable clamp pressure Cuttinglenght: 610 mm

Hydraulic clamp Digital readout + programming Light curtain safety Cuttinglenght: 610 mm

Workingwidth: 33 cm

Min size: 140 x 140 mm | Max size: 500 x 700 mm | Speed: up to 250 cycles per hour | Automatic board feed...

Joing forming & Pressing machine Make Zechini Model Roby Junior 2 Year 2020 Min size 140 x 14...

Size: 420 x 420 mm

Size: 58 x 38 cm | Height: adjustable | Angle: adjustable

Jogger - criss-cross delivery Make Bourg Model TA 860 Year 1995 Height adjustable Angle adju...

regulated vibration regulated jogging angle stainless steel Airbed Requirers compressed air for t...

Size: 75 x 115 cm

Maximum size: 460 x 650 mm | Feeder: Flatpile feeder | 1st station: 4 plate buckles 450 mm | 2nd station: 1...

for printing, numbering, diecutting, complete with 2 chases, inking rollers, some tools, etc. Max size: 260 ...

- VIVAS suction alignment belt - slitter shafts prior to entering buckle station - exit to left o...

H&H paper lift, plough folds left and right, H&H/Sigma pick&place basic unit Working width: 520 mm | Basic m...

Basic description: this line exists of 4 feeders, a bundle packer with side seal, a shrink tunnel, a U-turn...

Capacity: will do leather and fabrics

Min size: 180 x 230 mm | Max size: 380 x 500 mm | Feeding: manual semi automated feeding,. | Production out...

Max size: 455 mm | Production output: 1.6 meters per minute

Size: 46 cm | Function: filmcutter with light table and rotatary cutting wheel

Belt length: 650 mm (but we can extend the length to your desired length) | Belt width: 330 mm (maximum up ...

Min size: 210 x 297 mm | Max size: 521 x 710 mm | Substrates: 120 - 350 grams | Speed: 10-40 Meters per min...

Belt length: 130 cm | Belt width: 50 cm

Min size: 180 x 230 mm | Max size: 380 x 500 mm | Feeding: manual semi automated feeding,. | Production out...

Working width: 50 mm

Sheetsize: 330 x 320 mm | Speed: up to 300 cycles per hour

Size: 840 x 600 mm | Speed: 15 cycles per minute

Size: 400 x 550 mm | Height: 160 mm | Speed: 40 cycles per minute

Working width: 400 mm x unlimted | Min. product length: 100 mm | Max. product length: Unlimted | Passage he...

Size of the noteblock: 50 x 50 mm | Size of the cover: 50 x 110 mm | Cover process: The cover is being fed ...

Maximum size: 350 x 500 mm | Stations: 14 automatic stations | Pile height: 65 cm | Finisher: TB Flex 303 Q...

Max sheetsize: 250 x 350mm | Speed of substrates: up to 4.000 cycli per hour | Speed of numbering: up to 15...

Maximum size: 350 x 500 mm | Speed: up to 3.100 cycles per hour

Maximum width: 520mm | Paper stock: 120 - 350 grams | Production output: 15 meters per minute

Min size: 200 x 300 mm | Max size: 520 x 750 mm | Production output: 11 meters per minute

Max size: 760 x 1020 mm | Materials: 90 - 450 grams | Speed: up to 8.000 sheets an hour or up to 65 meters ...

Width: 760 mm

Min size: 100 x 110 mm | Max size: 450 x 450 mm | Table height: motorized adjuatable from 40 - 75 mm

Workingwidth: 300 mm | Working height: 240 mm | Band width: 30 mm | Rolls: suitable for inside standard rol...

Working size: 600 mm

Capacity: up to 3 mm

Width: 610 mm

Capacity: up to 3 mm

Working width: 800mm | Feeder: can be connected to any sheet feeder or used in-line, we can supply a feeder...

Size: 450 mm working width and spine width up to 100 mm

Size: 450 mm working width and spine width up to 100 mm

Size: 600 mm working width and spine width up to 100 mm

Working width: 700 mm | Tools: some tools, but not worth mentioning

Working width: 900 mm | Tools: 1 tool for Embroidery cards with 2 mm holes with 5 mm distance and 4 rows in...

Minimum sheet size: 100 x 100 mm | Maximum sheet sizes: 420 x 600 mm (Punching&Binding length: 420 mm)

Workingwidth: 340 mm | Tools: 1 x 3:1 with square holes for books | Closing: all standard thicknesses by ma...

Size: 500 x 500 mm | Tools: 2:1 with round holes 350 mm

Width: 700 mm | Power: 380 volts

Minimum width: 100 mm | Maximum width: 394 mm | Minimum length: 100 mm | Minimum thickness: 3 mm | Maximum ...

Min finished book size: 70 x 120 mm | Max finished book size: 32,5 x 500 mm | Book thickness: up to 60 mm

Min finished book size: 70 x 70 mm | Max finished book size: 460 x 500 mm | Book thickness: up to 60 mm

with tabulator Operation: Electric

Width: 490 mm | Thickness: up to 80 mm thickness

Size: 360 mm

Width: 800 mm | Glues: cold PVA glue

Size of the heating plate: 305 x 470 mm | Size of the mounting plate: 300 x 400 mm (a bigger plate is possi...

Max size: 340 x 460 mm

Size of the plate: 150 x 200 mm | Foil transport: Automatic by pneumatic arm

Minimum size: 80 x 110 x 2 mm | Maximum size: 450 x 440 x 80 | Speed: up to 200 cycles per hour

Width: 500 x 250 mm | Options: up to 100 mm thickness

Workingwidth: 420 mm | Thickness: 100 mm (electrical adjustable)

Minimum size: 80 x 110 x 2 mm | Maximum size: 340 x 320 x 80 | Speed: up to 200 cycles per hour

Minimum size: 80 x 110 x 2 mm | Maximum size: 450 x 440 x 80 | Speed: up to 200 cycles per hour

Nipping width: 420 mm | Thickness: up to 90mm adjustable | Pressure: up to 3.200 kg

Width: 500 x 250 mm | Options: up to 100 mm thickness

Nipping width: 420 mm | Thickness: up to 90mm adjustable | Pressure: up to 3.200 kg

Working width: 350 mm

Min size: 30 x 30 mm | Maximum size: 500 x 1000 mm | Thickness: 1 - 3 mm

Max size: 570 x 820 mm

Size: 1000 x 1500 mm

Glue appliance width: 120 cm (240 cm) | Glue melter: Nordson Vista 3500V | Glue computer: Nordson Eclipse E...

Workingwidth: 1100 mm | Substrate feeder: automatic suction feeder | Delivery: delivery on a table | Option...

Workingwidth: 1450 mm | Substrate feeder: automatic suction feeder | Laminate feeder: by hand | Delivery: d...

Max size: 260 x 380 mm

Size of the table: 100 x 105 cm | Space under the table: 18-19 cm | Stroke: 5-6 cm

Creasing length: 50 cm | Creasing depth: adjustable/variable | Creasing span: adjustable-variable | Creasin...

Size: 820 x 1120 mm inside the frame

Creasing length: 105 cm | Creasing depth: adjustable/variable | Cutting length: 30 cm slotting | Cuting wid...

Size:: 500 x 1000 mm | Pressure: 28 tons | Opening: 317-322 | Tools: comes with a magnetic head 100 mm 380 ...

Creasing length: 100 cm | Creasing depth: adjustable/variable

Speed: up to 30.000 | Minimum size: 100 x 110 mm | Maximum size: 330 x 700 mm

Maximum size: 420 x 630 mm | Feeder: Flatpile feeder | 1st station: 4 plate buckles 420 mm | 2nd station: k...

Max size: 800 x 1200 mm

Width: 460 mm

Feeder: Flat pile feeder with Tremat | Folding configuration: 4 platebuckles, 2 knives

Max size per stream: 235 x 235 mm | Min size: 100 x 75 mm | Nr. of streams: up to 3 streams | Speed: up to ...

Serial: 7092 | Size: Min: 150 x 210 mm / Max: 470 x 640 mm | Feeder: suction wheel + streem feeder | Foldin...

Feeder: bottom suction wheel | Folding configuration: 2 platebuckles

Serial number: 44940503 | Size: Min: 150 x 210 mm / Max: 820 x 1200 mm | Feeder: MBO F820 Flatpile feeder -...

Maximum size: 490 x 850 mm | Feeder: Flatpile feeder | 1st station: 4 plate buckles 490 mm | Delivery: belt...

Maximum size: 490 x 850 mm | Feeder: Flatpile feeder | 1st station: 4 plate buckles 490 mm | Delivery: belt...

Creasing length: 1300 mm | 1st "station": 6 sets of half cutting tools | 2nd "station": 7sets of creasing t...